CIREX DI 02 Internal lubricant release agent to be introduced at very low doses into the gel coat or polyester resin. Facilitates demolding and significantly delays mold fouling, thus increasing productivity.

CIREX DI 02 Internal lubricant release agent to be introduced at very low doses into the gel coat or polyester resin. Facilitates demolding and significantly delays mold fouling, thus increasing productivity.

CIREX INT 7 Internal lubricant release agent to be introduced into polyester resin. Facilitates demolding and significantly delays mold fouling, increasing productivity. CIREX DI 09 Internal lubricant release agent to be introduced at a very low dosage, mainly into polyester resin. Facilitates demolding and significantly delays mold fouling, increasing productivity. CIREX DI 01 Internal lubricant release agent to be added at a dosage of between 0.3 and 1% relative to the resin. This product reduces the thixotropy of the resin, which promotes fiber wetting. It significantly reduces, or even completely, the use of external release agent to be applied to the mold, while eliminating their fouling. When used in pultrusion, due to its good lubrication properties, it allows the profile to slide better in the die, which improves working speed while obtaining a very good surface finish. It is imperative to first mix the product thoroughly with the resin and then introduce the various fillers. Allows unrestricted post-molding operations such as gluing or painting.

CIREX INT 7 Internal lubricant release agent to be introduced into polyester resin. Facilitates demolding and significantly delays mold fouling, increasing productivity. CIREX DI 09 Internal lubricant release agent to be introduced at a very low dosage, mainly into polyester resin. Facilitates demolding and significantly delays mold fouling, increasing productivity. CIREX DI 01 Internal lubricant release agent to be added at a dosage of between 0.3 and 1% relative to the resin. This product reduces the thixotropy of the resin, which promotes fiber wetting. It significantly reduces, or even completely, the use of external release agent to be applied to the mold, while eliminating their fouling. When used in pultrusion, due to its good lubrication properties, it allows the profile to slide better in the die, which improves working speed while obtaining a very good surface finish. It is imperative to first mix the product thoroughly with the resin and then introduce the various fillers. Allows unrestricted post-molding operations such as gluing or painting.

CIREX INT 7 Internal lubricant release agent to be introduced into polyester resin. Facilitates demolding and significantly delays mold fouling, increasing productivity. CIREX DI 09 Internal lubricant release agent to be introduced at very low dosage mainly into polyester resin. Facilitates demolding and significantly delays mold fouling, increasing productivity.

CIREX DI 100 Internal lubricant release agent to be added at an average dosage of 1% relative to the resin. It is reserved for molding on metal molds that have a temperature above 100°C. In Press, it eliminates the need for external release agents to be applied to the mold while preventing them from clogging. Thanks to its good lubrication properties, in the pultrusion process it allows the profile to slide better in the die, which improves working speed while obtaining a very good surface finish. It is imperative to first mix the product carefully with the resin and then introduce the various fillers. This product is a great classic in polyester pultrusion. Allows without restriction, post-molding operations such as gluing or painting.

CIREX DI 100 Internal lubricant release agent to be added at an average dosage of 1% relative to the resin. It is reserved for molding on metal molds with a temperature above 100°C. In press, it eliminates the need for external release agents to be applied to the mold while preventing them from clogging. Thanks to its good lubrication properties, in the pultrusion process it allows the profile to slide better in the die, which improves working speed while obtaining a very good surface finish. It is imperative to first mix the product thoroughly with the resin and then introduce the various fillers. This product is a great classic for polyester pultrusion. Allows without restriction, post-molding operations such as gluing or painting. CIREX DI 03 Internal lubricant release agent to be added at an average dosage of 1% relative to the resin. This product reduces the thixotropy of the resin which promotes wetting of the fibers. It allows to considerably reduce, or even totally, the use of the external release agent to be applied to the mold, while eliminating their fouling. In the case of its use in pultrusion and due to its good lubrication properties, it allows the profile to slide better in the die, which promotes working speed while obtaining a very good surface finish. It is imperative to first carefully mix the product with the resin and then introduce the various fillers. Allows without restriction, post-molding operations such as gluing or painting.

CIREX DI 02 Internal lubricant release agent to be introduced at very low doses into the gel coat or polyester resin. Facilitates demolding and significantly delays mold fouling, thus increasing productivity.

CIREX DI 02 Internal lubricant release agent to be introduced at very low doses into the gel coat or polyester resin. Facilitates demolding and significantly delays mold fouling, thus increasing productivity.

CIREX INT 7 Internal lubricant release agent to be introduced into the polyester resin. Facilitates demolding and significantly delays mold fouling, increasing productivity. CIREX DI 15 Internal lubricant release agent to be added at an average dosage of 0.5 to 2% relative to the resin. It significantly reduces, or even completely, the use of external release agent to be applied to the mold, while eliminating fouling. When used in pultrusion and thanks to its good lubrication properties, it allows the profile to slide better in the die, which improves working speed while obtaining a very good surface finish. It is imperative to first mix the product thoroughly with the resin and then introduce the various fillers. Allows unrestricted post-molding operations such as gluing or painting.

CIREX INT 7 Internal lubricant release agent to be introduced into the polyester resin. Facilitates demolding and significantly delays mold fouling, increasing productivity. CIREX DI 15 Internal lubricant release agent to be added at an average dosage of 0.5 to 2% relative to the resin. It significantly reduces, or even completely, the use of external release agent to be applied to the mold, while eliminating fouling. When used in pultrusion and thanks to its good lubrication properties, it allows the profile to slide better in the die, which improves working speed while obtaining a very good surface finish. It is imperative to first mix the product thoroughly with the resin and then introduce the various fillers. Allows unrestricted post-molding operations such as gluing or painting.

CIREX INT 7 Internal lubricant release agent to be introduced into the polyester resin. Facilitates demolding and significantly delays mold fouling, increasing productivity. CIREX DI 15 Internal lubricant release agent to be added at an average dosage of 0.5 to 2% relative to the resin. It significantly reduces, or even completely, the use of external release agent to be applied to the mold, while eliminating fouling. When used in pultrusion and thanks to its good lubrication properties, it allows the profile to slide better in the die, which improves working speed while obtaining a very good surface finish. It is imperative to first mix the product thoroughly with the resin and then introduce the various fillers. Allows unrestricted post-molding operations such as gluing or painting.

CIREX DI 03 Internal lubricant release agent to be added at an average dosage of 1% relative to the resin. This product reduces the thixotropy of the resin, which promotes wetting of the fibers. It allows to considerably reduce, or even completely, the use of the external release agent to be applied to the mold, while eliminating their fouling. In the case of its use in pultrusion and due to its good lubrication properties, it allows the profile to slide better in the die, which promotes working speed while obtaining a very good surface finish. It is imperative to first mix the product carefully with the resin and then introduce the various fillers. Allows without restriction, post-molding operations such as gluing or painting.

CIREX DI 01 Internal lubricant release agent to be added at a dosage of between 0.3 and 1% relative to the resin. This product reduces the thixotropy of the resin, which promotes wetting of the fibers. It allows to considerably reduce, or even completely, the use of the external release agent to be applied to the mold, while eliminating their fouling. In the case of its use in pultrusion and due to its good lubrication properties, it allows the profile to slide better in the die, which promotes working speed while obtaining a very good surface finish. It is imperative to first mix the product carefully with the resin and then introduce the various fillers. Allows without restriction, post-molding operations such as gluing or painting.

CIREX DI 01 Internal lubricant release agent to be added at a dosage of between 0.3 and 1% relative to the resin. This product reduces the thixotropy of the resin, which promotes wetting of the fibers. It allows to considerably reduce, or even completely, the use of the external release agent to be applied to the mold, while eliminating their fouling. In the case of its use in pultrusion and due to its good lubrication properties, it allows the profile to slide better in the die, which promotes working speed while obtaining a very good surface finish. It is imperative to first mix the product carefully with the resin and then introduce the various fillers. Allows without restriction, post-molding operations such as gluing or painting.

CIREX DI 01 Internal lubricant release agent to be added at a dosage of between 0.3 and 1% relative to the resin. This product reduces the thixotropy of the resin, which promotes wetting of the fibers. It allows to considerably reduce, or even completely, the use of the external release agent to be applied to the mold, while eliminating their fouling. In the case of its use in pultrusion and due to its good lubrication properties, it allows the profile to slide better in the die, which promotes working speed while obtaining a very good surface finish. It is imperative to first mix the product carefully with the resin and then introduce the various fillers. Allows without restriction, post-molding operations such as gluing or painting.