CIREX DI 03 Internal lubricant release agent to be added at an average dosage of 1% relative to the resin. This product reduces the thixotropy of the resin, which promotes wetting of the fibers. It allows to considerably reduce, or even completely, the use of the external release agent to be applied to the mold, while eliminating their fouling. In the case of its use in pultrusion and due to its good lubrication properties, it allows the profile to slide better in the die, which promotes working speed while obtaining a very good surface finish. It is imperative to first mix the product carefully with the resin and then introduce the various fillers. Allows without restriction, post-molding operations such as gluing or painting. CIREX DI 15 Internal lubricant release agent to be added at an average dosage of 0.5 to 2% relative to the resin. It allows to considerably reduce, or even totally, the use of the external release agent to be applied to the mold, while eliminating their fouling. In the case of its use in pultrusion and thanks to its good lubrication properties, it allows the profile to slide better in the die, which promotes the working speed while obtaining a very good surface finish. It is imperative to first mix the product carefully with the resin and then introduce the various fillers. Allows without restriction, post-molding operations such as gluing or painting. CIREX INT 11 PULL Internal lubricant release agent to be added at an average dosage of 1 to 2% compared to the resin. Thanks to its good lubrication properties, it allows the profile to slide better in the die, which promotes the working speed while obtaining a very good surface finish. It is imperative to first mix the product carefully with the resin and then introduce the various fillers. This product is a great classic in epoxy pultrusion. Allows unrestricted post-molding operations such as gluing or painting. CIREX DI 100 Internal lubricant release agent to be added at an average dosage of 1% relative to the resin. It is reserved for molding on metal molds with a temperature above 100°C. In press, it eliminates the need for external release agents to be applied to the mold while preventing them from clogging. Thanks to its good lubrication properties, in the pultrusion process it allows the profile to slide better in the die, which improves working speed while obtaining a very good surface finish. It is imperative to first mix the product thoroughly with the resin and then introduce the various fillers. This product is a great classic for polyester pultrusion. Allows unrestricted post-molding operations such as gluing or painting. CIREX INT 8 PULL Internal lubricant release agent to be added at an average dosage of 1 to 2% relative to the resin. With its good lubricating properties, it allows the profile to slide better in the die, which promotes working speed while obtaining a very good surface finish. It is imperative to first mix the product thoroughly with the resin and then introduce the various fillers. This product is a great classic in epoxy pultrusion. Allows without restriction, post-molding operations such as gluing or painting. CIREX DI 01 Internal lubricant release agent to be added at a dosage between 0.3 and 1% compared to the resin. This product reduces the thixotropy of the resin which promotes the wetting of the fibers. It allows to considerably reduce, or even completely, the use of the external release agent to be applied to the mold, while eliminating their fouling. In the case of its use in pultrusion and due to its good lubricating properties, it allows the profile to slide better in the die, which promotes working speed while obtaining a very good surface finish. It is imperative to first mix the product thoroughly with the resin and then introduce the various fillers. Allows unrestricted post-molding operations such as gluing or painting.

CIREX DI 03 Internal lubricant release agent to be added at an average dosage of 1% relative to the resin. This product reduces the thixotropy of the resin, which promotes wetting of the fibers. It allows to considerably reduce, or even completely, the use of the external release agent to be applied to the mold, while eliminating their fouling. In the case of its use in pultrusion and due to its good lubrication properties, it allows the profile to slide better in the die, which promotes working speed while obtaining a very good surface finish. It is imperative to first mix the product carefully with the resin and then introduce the various fillers. Allows without restriction, post-molding operations such as gluing or painting. CIREX DI 15 Internal lubricant release agent to be added at an average dosage of 0.5 to 2% relative to the resin. It allows to considerably reduce, or even totally, the use of the external release agent to be applied to the mold, while eliminating their fouling. In the case of its use in pultrusion and thanks to its good lubrication properties, it allows the profile to slide better in the die, which promotes the working speed while obtaining a very good surface finish. It is imperative to first mix the product carefully with the resin and then introduce the various fillers. Allows without restriction, post-molding operations such as gluing or painting. CIREX INT 11 PULL Internal lubricant release agent to be added at an average dosage of 1 to 2% compared to the resin. Thanks to its good lubrication properties, it allows the profile to slide better in the die, which promotes the working speed while obtaining a very good surface finish. It is imperative to first mix the product carefully with the resin and then introduce the various fillers. This product is a great classic in epoxy pultrusion. Allows unrestricted post-molding operations such as gluing or painting. CIREX DI 100 Internal lubricant release agent to be added at an average dosage of 1% relative to the resin. It is reserved for molding on metal molds with a temperature above 100°C. In press, it eliminates the need for external release agents to be applied to the mold while preventing them from clogging. Thanks to its good lubrication properties, in the pultrusion process it allows the profile to slide better in the die, which improves working speed while obtaining a very good surface finish. It is imperative to first mix the product thoroughly with the resin and then introduce the various fillers. This product is a great classic for polyester pultrusion. Allows unrestricted post-molding operations such as gluing or painting. CIREX INT 8 PULL Internal lubricant release agent to be added at an average dosage of 1 to 2% relative to the resin. With its good lubricating properties, it allows the profile to slide better in the die, which promotes working speed while obtaining a very good surface finish. It is imperative to first mix the product thoroughly with the resin and then introduce the various fillers. This product is a great classic in epoxy pultrusion. Allows without restriction, post-molding operations such as gluing or painting. CIREX DI 01 Internal lubricant release agent to be added at a dosage between 0.3 and 1% compared to the resin. This product reduces the thixotropy of the resin which promotes the wetting of the fibers. It allows to considerably reduce, or even completely, the use of the external release agent to be applied to the mold, while eliminating their fouling. In the case of its use in pultrusion and due to its good lubricating properties, it allows the profile to slide better in the die, which promotes working speed while obtaining a very good surface finish. It is imperative to first mix the product thoroughly with the resin and then introduce the various fillers. Allows unrestricted post-molding operations such as gluing or painting.

PAT 656/3 Internal lubricant release agent to be added at an average dosage of 1 to 2% relative to the resin. It allows to considerably reduce, or even completely, the use of the external release agent to be applied to the mold, while eliminating their fouling. In the case of its use in pultrusion and due to its good lubricating properties, it allows the profile to slide better in the die, which promotes working speed while obtaining a very good surface finish. It is imperative to first mix the product carefully with the resin and then introduce the various fillers. This product is a great classic of epoxy pultrusion. Allows without restriction, post-molding operations such as gluing or painting. CIREX INT 8 PULL Internal lubricant release agent to be added at an average dosage of 1 to 2% relative to the resin. Thanks to its good lubricating properties, it allows the profile to slide better in the die, which promotes working speed while obtaining a very good surface finish. It is imperative to first mix the product carefully with the resin and then introduce the various fillers. This product is a great classic for epoxy pultrusion. Allows unrestricted post-molding operations such as gluing or painting. CIREX 1888 LE

CIREX DI 03 Internal lubricant release agent to be added at an average dosage of 1% relative to the resin. This product reduces the thixotropy of the resin, which promotes wetting of the fibers. It allows to considerably reduce, or even completely, the use of the external release agent to be applied to the mold, while eliminating their fouling. In the case of its use in pultrusion and due to its good lubrication properties, it allows the profile to slide better in the die, which promotes working speed while obtaining a very good surface finish. It is imperative to first mix the product carefully with the resin and then introduce the various fillers. Allows without restriction, post-molding operations such as gluing or painting. PAT 654 M Internal lubricant release agent to be added at an average dosage of 1 to 2% relative to the resin. It allows to considerably reduce, or even completely, the use of the external release agent to be applied to the mold, while eliminating their fouling. When used in pultrusion and due to its good lubrication properties, it allows the profile to slide better in the die, which promotes working speed while obtaining a very good surface finish. It is imperative to first mix the product carefully with the resin and then introduce the various fillers. This product is a great classic in epoxy pultrusion. Allows without restriction, post-molding operations such as gluing or painting. CIREX DI 01 Internal lubricant release agent to be added at a dosage between 0.3 and 1% compared to the resin. This product reduces the thixotropy of the resin which promotes the wetting of the fibers. It allows to considerably reduce, or even completely, the use of external release agent to be applied to the mold, while eliminating their fouling. When used in pultrusion, due to its good lubrication properties, it allows the profile to slide better in the die, which improves working speed while obtaining a very good surface finish. It is imperative to first mix the product thoroughly with the resin and then introduce the various fillers. Allows unrestricted post-molding operations such as gluing or painting.

CIREX DI 15 Internal lubricant release agent to be added at an average dosage of 0.5 to 2% relative to the resin. It allows to considerably reduce, or even completely, the use of the external release agent to be applied to the mold, while eliminating their fouling. In the case of its use in pultrusion and thanks to its good lubricating properties, it allows the profile to slide better in the die, which promotes working speed while obtaining a very good surface finish. It is imperative to first mix the product carefully with the resin and then introduce the various fillers. Allows without restriction, post-molding operations such as gluing or painting. PAT 654 M Internal lubricant release agent to be added at an average dosage of 1 to 2% relative to the resin. It allows to considerably reduce, or even completely, the use of the external release agent to be applied to the mold, while eliminating their fouling. When used in pultrusion and due to its good lubrication properties, it allows the profile to slide better in the die, which promotes working speed while obtaining a very good surface finish. It is imperative to first mix the product carefully with the resin and then introduce the various fillers. This product is a great classic in epoxy pultrusion. Allows without restriction, post-molding operations such as gluing or painting. CIREX DI 01 Internal lubricant release agent to be added at a dosage between 0.3 and 1% compared to the resin. This product reduces the thixotropy of the resin which promotes the wetting of the fibers. It allows to considerably reduce, or even completely, the use of external release agent to be applied to the mold, while eliminating their fouling. When used in pultrusion, due to its good lubrication properties, it allows the profile to slide better in the die, which improves working speed while obtaining a very good surface finish. It is imperative to first mix the product thoroughly with the resin and then introduce the various fillers. Allows unrestricted post-molding operations such as gluing or painting.

PAT 656/3 Internal lubricant release agent to be added at an average dosage of 1 to 2% relative to the resin. It allows to considerably reduce, or even completely, the use of the external release agent to be applied to the mold, while eliminating their fouling. In the case of its use in pultrusion and due to its good lubricating properties, it allows the profile to slide better in the die, which promotes working speed while obtaining a very good surface finish. It is imperative to first mix the product carefully with the resin and then introduce the various fillers. This product is a great classic of epoxy pultrusion. Allows without restriction, post-molding operations such as gluing or painting. CIREX INT 8 PULL Internal lubricant release agent to be added at an average dosage of 1 to 2% relative to the resin. With its good lubricating properties, it allows the profile to slide better in the die, which promotes working speed while obtaining a very good surface finish. It is imperative to first mix the product thoroughly with the resin and then introduce the various fillers. This product is a great classic in epoxy pultrusion. Allows without restriction, post-molding operations such as gluing or painting. CIREX DI 01 Internal lubricant release agent to be added at a dosage between 0.3 and 1% compared to the resin. This product reduces the thixotropy of the resin which promotes the wetting of the fibers. It allows to considerably reduce, or even completely, the use of the external release agent to be applied to the mold, while eliminating their fouling. In the case of its use in pultrusion and due to its good lubricating properties, it allows the profile to slide better in the die, which promotes working speed while obtaining a very good surface finish. It is imperative to first mix the product thoroughly with the resin and then introduce the various fillers. Allows unrestricted post-molding operations such as gluing or painting.